Clean Agent Computer Room Extinguishers
Halotron Fire Extinguishers
Halotron I fire extinguishers provide "Clean Agent" fire protection that leaves no residue for sensitive electronics or similar High Value fire protection requirements. Halotron I is discharged as a rapidly evaporating liquid. Its relatively high boiling point of 80.6°F (27°C) gives it an advantage over other clean extinguishing agents, which tend to have lower boiling points and therefore evaporate sooner, limiting their throw length and overall effectiveness for the non-expert firefighter.
FEATURES:
• Stored Pressure Design
• Dependable Drawn Steel Cylinders
• Durable High Gloss Polyester Powder Paint
• All Metal Valve Construction
• Temperature Range -40°F to 120°F
​
ENVIRONMENTALLY ACCEPTABLE
• EPA approved “Clean Agent” for Class A, B & C hazards
• Low GWP (Global Warming Potential)
• Low ODP (Ozone Depletion Potential)
• Short Atmospheric Half-Life
• CLEAN Leaves No Residue
USER FRIENDLY
• Maximum Visibility During Discharge
• Large Loop Pull Pin
• No Electrical Conductivity Back to the Operator
• No Thermal or Static Shock
Water Mist Fire Extinguishers
The Water Mist unit uses deionized water and incorporates a spray wand nozzle. These features make it safe for use on energized electrical equipment. Water Mist is considered to be the #1 extinguisher choice for libraries and hospitals. 2.5 Gallon Pressurized Water Mist Fire Extinguishers: These Units offer Class A (paper, wood, and textile) fire protection as well as Safe Class C Electrical Fire protection up to 100,000 volts. The extinguisher is equipped with a non-conductive discharge hose/and wand assembly which insulates the operator from electrical shock. These water mist units can be used in and around electrical equipment. These extinguishers can be used for I.T. / Computer type fires that will not leave residue, or conduct electricity, and offers minimal clean-up.
Clean Guard/FE-36 Extinguishers
Clean Guard/FE-36 extinguishers non-residue/clean agent extinguishers can also be another alternative for the customer. These units have similar fire fighting capabilities as Halotron.
Halon 1211 Extinguishers
Halon 1211 Pressure Gas clean agent fire extinguishers offer excellent fire fighting protection for Class B (Flammable Liquids) and Class C (energized electrical) hazards. In their larger sizes, Halon 1211 offers a Class A (Paper, Wood & Textile) capability as well. Although Halon 1211 is no longer produced because of their ozone depleting qualities, they can be recharged & serviced under current EPA Protocols using Recycled, Non-Virgin Halon 1211 Gas. Halon 1211 extinguishers have the best fire fighting ratings to extinguish fires, over all of the other clean agents available in the fire equipment marketplace.
*FAA (Aircraft) Approved
AD-X, Buckeye Mini Guard & SEVO Flex Automatic Ceiling Mounted Extinguishers
Total Flood and Spot Protection at a reasonable cost for 24/7 fire protection. Usage examples: IT/computer rooms, telephone equipment rooms, backup file rooms, and vaults. These units can be hung or mounted from the ceiling of the area to be protected to provide 24/7 fire protection at a lower cost compared to other clean agent automatic suppression systems. These automatic extinguishers can be equipped with a factory installed pressure switch to allow for automatic shut down of electric equipment, send a signal to a fire or security alarm panel or activate a local alarm device to alert your employees. In addition we offer SEVO Systems Novec Clean Agent Suppression Systems for Larger Areas to be Protected.
